DANIELE MOLARO CONSULTING

Oilfield Consultant in Surface and Subsea Wellheads Equipment,Christmas Trees,Flow Control Equipment,Seals(Elastomerics & Metal-to-Metal)                  Contact me NEW E-mail: country45ve@yahoo.com

dmc04-1.JPG (13716 bytes)

7. VALVE MODEL "SLBG"   SUPREME SERIES

  DMC04.jpg (36243 bytes)

 Daniele Molaro Consulting introduces the API FLG Valve Slab Gate Type, Model "SLBG" Supreme Series. This is a very simple Valve API FLG Ends, designed to meet the highly competition in Oilfield Equipment but at the same time it is also a rough, effective, and consistent product that any Wellheads  Manufacturing Shop can produce under a particular arrangement without disturbing the basic design.

You are invited to contact me and discuss your interest in this design to be manufactured for your shop as well as other technical details.

 

 

dmc35.JPG (21525 bytes)    dmc36.JPG (12544 bytes)   dmc37.JPG (15440 bytes)

 

FLANGED VALVES "SLBG" SUPREME SERIES

Valve Size Flanged Ends Working Pressure(PSI) Lenght Between Flanges Total Height
2.063 2-1/16 2,000

3,000

5,000

11.625

14.625

14.625

21

22

22

2.563 2-9/16 2,000

3,000

5,000

13.125

16.625

16.625

_

_

23

3.125 3-1/18 5,000 18.625 25.563

    Note: Measures in this table are: Valve Size & Flanged Ends are in inches,per API 6A,6D. Lenght between flanges & Total Height are in inches. Other Valve Sizes greater than indicated in the table are also available under request.

 

DMC07.jpg (38637 bytes) This Valve API Flanged Ends are designed to meet the applications in High Pressure ( 10,000 PSI to 15,000 PSI of WP) and the basic design is Seat and Gate in full Metal-to-Metal contact, special Packing Sets that allows H2S and CO2 working conditions and also a Back-Seat ability to assure the replacement of Packing Seals and Rollers with the Valve on Line in Service.

Body is a closed forge type Low Alloy Steel designed to severe and rough working conditions, but at the same time maintaining the simplicity in the design.

Designs for this Valve Series SLBG-2000 start from 2-1/16-10,000 PSI up to 3-1/16-15,000 PSI

 

Ahead please find other photos of the wide variety that Daniele Molaro Consulting can assist in the design and develop the final product.

 

dmc32.JPG (14478 bytes)  dmc38.JPG (17049 bytes)  dmc30.JPG (15953 bytes)

 

 

 

Updated on:01/21/04Copyright @2003 Daniele Molaro Consulting

Note:This is only a brochure and is not intended to be used as a manufacturing's parts data information;our mission is announce our technical & engineering service and assist customers bringing them technical support, please contact us regarding this WEB site,or for assistance on site.